Hi, I tried a modification on ediabas.ini, basically I changed this values:
TimeoutConnect = 9000 (2000)
TimeoutReceive = 9000 (2000)
TimeoutFunction = 30000 (10000)
It would seem that now everything works perfectly in ADS mode, I can enter the various modules on the first attempt without receiving any errors.
Thank you for all the help you have given me.
Edit.
I entered these values for testing, are there any default values for the ADS interface?
Hi, I followed your advice. I put the interface into OBD mode by doing all the various resets in ediabas.ini and obd.ini. .
The OBD mode interface in the modules it can read is just perfect, such as GM4 and EWS.
In NCS, vehicle identification via EWS is lightning fast.
Of course, in OBD mode, it can't and won't get into non-OBD modules like the Kombi.
My question is this: how can I get the same connection stability in ADS mode?
Thank you
Hi, only ADS mode
This is my COM1 port config:
Bit per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Xon/Xoff (i've tried "none" but same result)
Fifo enabled
Hi, my name is Lorenzo and this is my problem:
When I connect the ADS interface to my BMW E36 '97 I often get the error IFH-0009. With INPA and DISv44 I am able to enter the selected modules almost without problems, at the latest on the third attempt. The real problem I have with NCS EXPERT, it's a drama because I can read and download the modules 1 time out of 20 attempts. I can't understand why sometimes everything is perfect and sometimes it takes so many attempts.
My specs:
Laptop: Dell D830 with rs232
OS: Windows XP SP3 x86
Interface: Do-It-Auto ADS
Ediabas: 6.4.3
Thank you in advance
